How to Rename Rooms and Save Room and Office Configurations

How to Rename Rooms

To rename a room:

1.	Mouseover the navigation bar at the top of the DNE, and

2.	Click the gold bar at the left or right end of the navigation bar .

3.	A dialog box will appear, asking for the New Room Name. Type the new name, and

Click

You can only rename the three workrooms (By default named Workroom 1, Workroom 2 and Workroom 3). Single purpose rooms (Maps Room, Internet Manager, etc.) are named for their purposes.

How to Save Room and DNE Configurations

To save current room configuration to the active NE:

•	Click the top right control on the bench clock.

To save current DNE configuration to the active NE:

•	Click the small button on the right side of the bench clock.

To auto-file room and DNE snapshots to the cabinet:

1.	Go to the Fusebox

2.	Under System Information, click the Advanced tab

3.	Tick the Auto-File Room/DNE Snapshots tab

When auto-filing is on, an DNE configuration tile and a room configuration tile for each room in the DNE is saved to the cabinet.

To find auto-filed tiles:

1.	Go to the cabinet,

2.	Drag the cabinet from the cabinet bar into any panel.

3.	Activate the NE in any room to access all saved DNE configurations

4.	Open the NE in any panel to view all the room NEs.

5.	Activate any room NE in any room to access all saved configurations of that room.

6.	Doubleclick a room tile to reconfigure the room.

Room configurations can only be played in the room where they were made, because the tools are different in each room. Workroom tiles can be played in any workroom.

In the cabinet, you cannot delete the target NEs for any existing room. However, once you rename a room, you are able to delete the NE with the old name. Target NEs for each room must exist in order for the configuration tiles to get saved some place.

If you reconfigure a room that has anything in it, the DNE will offer to save the current (soon-to-be-replaced) configuration as a tile and add that tile to the bench when it reconfigures the room. This option allows you to return to your current configuration after using the saved one. Note that the bench is not added to the configuration permanently, it is added temporarily, so that you can return to it if you wish, either from the bench or from the cabinet (the current room configuration is saved to the NE for that room in cabinet). While this functionality is not available for DNE tiles or bench tiles, bench tiles can always be opened in a different room and then accessed from anywhere.