How to Access, Save and Delete Cabinet Configurations
Cabinet configurations are accessed, saved and deleted via the control. This control is made up of a clock component that is used to save the configuration at this moment in time and a cabinet component is used to access or delete an existing configuration of the cabinet.
To access a saved cabinet configuration:
Either:
1.
Click the . On mouseover the cursor will change to the one on the left here.
2.
Mouseover Open Cabinet Configuration, and
3.
Select the desired configuration.
Or:
1.
Click . This menu will appear:
2.
Mouseover Cabinet Configurations,
3.
Mouseover Open,and
4.
Select the desired configuration.
To save a cabinet configuration:
Either:
1.
Click the . On mouseover the cursor will change to the one on the left here.
2.
The DNE will prompt you to name the configuration. Name the configuration, and
3.
Click .
Or:
1.
Click . This menu will appear:
2.
Mouseover Cabinet Configurations,
3.
Mouseover Save Current. A dialog box will appear to let you save or update your configuration.
4.
Name the configuration, and
5.
Click .
To update a previously saved cabinet configuration:
Either:
1.
Click the . The save configurations dialog box will appear.
2.
Click the arrow by the configuration dialog box, and
3.
From the drop down menu, select the name of the configuration you want to update.
4.
Click .
5.
The DNE will remind you that this configuration already exists and will ask you if you want to replace it. Click.
Or:
5.
Click . This menu will appear:
6.
Mouseover Cabinet Configurations,
7.
Mouseover Save Current. A dialog box will appear to let you save or update your configuration.
4.
Click on the right side of the box. A dropdown list will list all currently saved configurations. From the drop down menu, select the name of the configuration you want to update.
5.
Click .
6.
The DNE will remind you that this configuration already exists and will ask you if you want to replace it. Click.
To delete a cabinet configuration:
Either:
1.
Click the . On mouseover the cursor will change to the one on the left here.
2.
Mouseover Delete Cabinet Configuration, and
3.
Select the desired configuration.
4.
The DNE will ask you to press OK to delete the cabinet configuration from the list. Click.
